Wind Towers

Southwest Wind power recommends the tower kits as a reliable option for all wind turbines,

Part	24'	30'	50'	65'	80'
	(7.2m)	(9.0m)	(15.0m)	(19.5m)	(24.0m)
Tower Base	1	1	1	1	1
Coupler/Lower Wire Set	0	1	2	3	4
Coupler/Top Wire Set	1	1	1	1	1
Turbine Mount Coupler	1	1	1	1	1
Tower Pivot Coupler	1	1	1	1	1
Gin Pole Coupler	0	0	0	1	1
Gin Pilot Coupler	0	1	1	1	1
Gin Pole Top	0	1	1	1	1
Gin Pole Top Link	0	1	1	1	1
Coupler Bolts	8	16	20	28	32
Cable Thimbles	4	8	12	16	20
Cable Clamps	8	16	24	32	40

Pipe Requirements:

Tower Kits use 2.5 inches (63.5 mm) CQ40 fence pipe or schedule 40 water pipe (actual outer diameter of pipe is 2.875 inches (73 mm).

Specifications and Pipe Lengths:

	24'	30'	50'	65'	80'
	(7.2m)	(9.0m)	(15.0m)	(19.5m)	(24.0m)
Poles	1 x 24' (7.2m)	1 x 13' (3.9m)	2 x 15' (4.5m)	3 x 15' (4.5m)	4 x 15' (4.5m)
Poles	1 x 24' (7.2m)	1 x 17' (5.1 m)	1 x 20' (6.0m)	1 x 20' (6.0m)	1 x 20' (6.0m)
Gin Pole	NA	1 x 15' (4.5m)	1x 19' (5.7m)	1 x 20' (6.0m)	1 x 20' (6.0m)
Gin Pole	NA	1 x 15' (4.5m)	1x 19' (5.7m)	1 x 6' (1.8m)	1 x 13' (3.9m)
Guy Radius	15' (4.5m)	20' (6.0m)	25' (7.5m)	33' (9.9m)	40' (12.9m)
Auger Size	36" (91.5cm)	48" (121.9cm)	48" (121.9cm)	60" (152.4cm)	60" (152.4cm)
Anchor Hole Diameter	1.5' (.45m)	2' (.6m)	2' (.6m)	2' (.6m)	2' (.6m)
Anchor Hole Depth	3' (.9m)	3' (.9m)	3' (.9m)	3' (.9m)	4' (1.2m)
Concrete Depth	12" (30.5cm)	9" (22.9cm)	10" (25.4cm)	12" (30.5cm)	12" (30.5cm)
Anchor Points	Each tower uses 4 anchor points

Center for Alternative Technologies, Kenya is a wholesale distributor of solar, wind and power back-up equipment. We have in stock Lorentz, Tripplite, Trace/Xantrex, Outback, Kyocera, Sharp, Mitsuibishi/Schuko, Morningstar, Steca, Suntech, Southwest Wind, Surrette, Deka, Sundanzer, Minus 40, Ezinc, FG Wilson and Perkins Generators.

Center for Alternative Technologies

P.O. Box 64921, Nairobi, Kenya, 00620

Tel: +254208000176, +254208000175, +254208000174

Mobile: 254720635153, +254736099227

Email: info@cat.co.ke